The sensor uses this principle to detect continuous rotational movement
along a shaft, while also taking on the
重復精度和測量精度高溫度漂移極小擴大的溫度范圍–40至+85 °C
堅固而緊湊的金屬殼體安裝簡便 – 外殼上有四個固定孔
它們以0.1°的極高精度進行測量,可以確定一個軸上與水平線之間大為360°的偏差。
極短規格:帶開關輸出端的超聲波傳感器外殼長度只有55 mm,
模擬傳感器測量長度只有60 mm。得益于全新的溫度補償,
這些傳感器在工作電壓接通45秒鐘后就已經達到佳工作點。自身加熱
These compact chips include microelectromechanical
structures that move according to the inclination of the earth's
gravitational force. The sensor output consists of two
和安裝條件的影響可被迅速補償
– 在接通供電電壓后不久和在連續運行時都能保證的測量結果。
M12外殼,4芯M12插接器包括插頭在內長度僅55 mm
兩個掃描距離,測量范圍20-350 mmPNP或NPN規格的開關輸出端
4-20 mA或0-10 V模擬輸出端通過Pin 2示教
基于流體的傾斜度傳感器BSI非常適合以理想方式調節過程。
0.1°高精度可提供Modbus以及4-20 mA接口
components: the tilt component is
stationary and the acceleration component is dynamic.
傳感器基于流體的測量單元由四個電容器構成,并且注有一種
流體作為電介質。傾斜度可通過電容器極板被流體覆蓋的程度來確定。
測量一個軸上與水平線之間大為360°的偏差
的分辨率保證的角度測量
position control of the machine assembly on both axes.
Compared to fluid-d tilt measurements, the effect of
vibration on the sensor is small. The result
is to complete your task with the best accuracy.