阿斯卡本安型防爆電磁閥技術參數，8551G422
上海乾拓貿易有限公司
：楊江玲
企業QQ：2880626083
手 機：（）
電 話：-8012
郵箱；@163.com
地址：上海市嘉定區江橋嘉涌路6號樓713室
特點：
in solid state components for switch-off peak voltage suppression, independent polarity connection
and electronic enhancement Ingress protection degree IP65 Enclosure provided
with integral strain relief for cables with an o.d. from 6 to 10 mm
The continous duty F polypropylene moulded spade plug connector coil contains moulded
A wide range of valves can be supplied with the operator
D Eex ia IIC T6 IP65 完全模制保護,
Explosion proof operator, intended for use in potentially explosive atmospheres,
according to Directive ATEX 94/9/EC EC type examination certificate (KEMA 98 ATEX 2544)
適用于潛在爆炸環境,本安型,II 1 G/2
and IECEx certificate (IECEx KEM 08.0017) are in compliance with the International
and European Standards IEC and EN: 60079-0, 60079-11, 60079-26, 61241-0 and 61241-11
This highly efficient solenoid operates at very low power level (0.4W)
概述：
Multi language installation/maintenance instructions are included with each valve
Select the requested "T" ification from the temperature
ambient temperature and cold (20°C) electrical holding power values.
The operator can be rotated 360° to select the most favourable position for cable entry
ification tables (AC or DC), respecting the maximum
The solenoid operators can be mounted in any position without affecting operation
Application of the operator, located within hazardous areas,
is not permitted without the addition of an approved and ified device
The minimum allowable ambient temperature is -40°C for the operator.
(such as barriers) located between the safe and hazardous area
技術參數：
Riddering PTFE (polytetrafluoroethylene) Connector specification
springs & plugnut Stainless steel Seals and discs NBR (nitrile)
ISO 4400 Nameplate Stainless steel Cartridge Welded, packless AISI 430 SS
Solenoid enclosure PP (polypropylene) Core, tube,
阿斯卡本安型防爆電磁閥技術參數，8551G422
