阿斯卡隔膜微型閥,ASCO隔膜微型閥作用
上海乾拓貿易有限公司
企業QQ：2880626087
；
手機；（）
郵箱；@163.com
：劉仁勇
地址：上海市嘉定區江橋嘉涌路99弄6號713室
滿足所有的EC指令；口徑：M5 - 1/4，閥體：不銹鋼/PVDF/聚丙烯玻璃纖維，電壓：AC/DC；壓力：0-2.5BAR； 2、隔膜圓筒型：應用于醫療氣體分析儀器和生物技術設備，用于控制酸堿和分析純試劑，低死區體積，低功耗，安裝方便；口徑：? 8 mm or pad-mounting body，閥體：PEEK，電壓：12V - 24V/DC；壓力：0-0.5BAR；
directional operation provided up to 1 bar ? Flow restrictor built into the valve body (range of 10 to ) ? Any application where the ? uid may not come into contact with the
electromagnetic control section of the solenoid valves ? The solenoid valves are ideal for controlling aggresive ? uids and have easy to ? ush internal cavities ? The solenoid valves satisfy all relevant EC directives GENERAL Differential pressure See ?SPECIFICATIONS? [1 bar =100 kPa] Maximum viscosity 37 cSt (mm2/s) Response time 20 ms ? uids (?) temperature range (TS) seal materials (?) air, inert gases, water, oil and liquids - 10°C to + 80°C FPM (? uoroelastomer) MATERIALS IN CONTACT WITH FLUID (?) Ensure that the compatibility of the ? uids in contact with the materials is veri? ed Body Glass ? bre ? lled PP Diaphragm FPM OTHERS MATERIALS Internal parts Stainless steel
ELECTRICAL CHARACTERISTICS Coil insulation F Connector Spade plug (cable ? 6-10 mm) Connector speci? cation ISO 4400 / EN 175301-803, form A Electrical safety IEC 335 Electrical enclosure protection Moulded IP65 (EN 60529) Standard voltages DC (=) : 12V - 24V (Other voltages and 60 Hz on request) AC (~) : 24V - 115V - 230V / 50 Hz
pre? x option
power ratings operator ambient temperature range (TS)
replacement coil
type (1)
inrush ~
holding ~
? Solenoid valves for medical analysers, biotechnology and chemical industry ? Any application where the ? uid may not come into contact with the electromagnetic control section of the solenoid valves ? The solenoid valves are ideal for controlling aggressive ? uids and have easy to ? ush internal cavities ? The solenoid valves satisfy all relevant EC directives GENERAL Differential pressure See ?SPECIFICATIONS? [1 bar =100 kPa] Maximum viscosity 37 cSt (mm2/s) Response time 10 ms (SCE282B001) ; 20 ms (SCG282B003) Dead volume < 70 μl (coupling not included) ? uids (?) temperature range (TS) seal materials (?) air, inert gases, water, oil and liquids - 10°C to + 100°C VMQ (silicone) MATERIALS IN CONTACT WITH FLUID (?) Ensure that the compatibility of the ? uids in contact with the materials is veri? ed Body Stainless steel AISI 316 or PVDF (polyvinylidene ? uoride) Diaphragm VMQ, FPM or EPDM OTHERS MATERIALS Internal parts Stainless steel
hot/cold = ~= (VA) (VA) (W) (W) (C°) 230 V/50 Hz 24 V DC SC 23 14 8 9 -10 to + 60 43005 01
ELECTRICAL CHARACTERISTICS Coil insulation F Connector Spade plug (cable ? 4-6 mm or ? 6-10 mm) Connector speci? cation 2,5 W (DMX) DIN 43650, 9,4 mm, industry standard B 8 W /9 W (ANX) ISO 4400 / EN 175301-803, form A Electrical safety IEC 335 Electrical enclosure protection Moulded IP65 (EN 60529) Standard voltages DC (=) : 12V - 24V (Other voltages on request) AC (~) : 24V - 115V - 230V / 50 Hz
? Valves can also be supplied with FPM (? uoroelastomer) and EPDM (ethylene-propylene) seals.
Use the appropriate optional suf? x letter for identi? cation ? Other pipe connections are available on request ? Plug with visual indication and peak voltage suppression or with cable length of 2 m (see Solenoids, Coils & Accessories section)
INSTALLATION ? The solenoid valves can be mounted in any position without affecting operation. For optimum performance mount solenoid vertical and upright ? Pipe connection identi? er is G = G (ISO 228/1) ? Installation/maintenance instructions are included with each valve ? Replacement coils are available: 2,5 W (DMX): DC, 12 V, catalogue number 43005188 8 W/9 W (ANX): DC, 12 V, catalogue number 43005271, AC, 24 V, catalogue number 43005273 ; 115 V, catalogue number 43005274
FEATURES ? Solenoid valves for medical analysers, biotechnology and chemical industry ? Bi-
阿斯卡隔膜微型閥,ASCO隔膜微型閥作用
